Shop | ABX Distribution

Mudguards

Code: EMU160

The ETC Clip On Road Mudguardsare the ideal solution for someone that wants to fit or remove mudguards depending on the weather. Simply mount the brackets then clip on/ off the guard using the quick release levers. Key Features: * Quick release * Light * Easy to fit

Code: 89923

FORCE S/POST MOUNTED REAR MUDGUARD

designed for MTB 20" / 24" / 26" wheels mounting on the seatpost with plastic wheel-lock seatpost diameter range: 25 mm - 32 mm width of mudguard: 75 mm material: plastic, black weight: 172 g packed in polybag

Code: 89911

FORCE 700-28C MUDGUARD PAIR BLACK

set of mudguards front + rear long designed for 28" ROAD wheels width of mudguard: 36 mm material: PET with two-piece steel brackets weight: 540 g packed in polybag made in Germany

Code: 89906

FORCE TREKKING MUDGUARD PAIR BLACK

set of mudguards front + rear designed for 28" TREKKING wheelswidth of mudguard: 48 mmmaterial: PET with two-piece steel bracketsweight: 530 gpacked in polybagmade in EU-Germany

Code: 89916

FORCE TROW MUDGUARD

under frame mudguard mounting under the frame by rubber straps width of mudguard min./max.: 100/130 mm length: 34,5 cm weight (incl. straps): 111 g material: plastic packed on FORCE card

Code: 89915

FORCE UNDER FRAME MUDGUARD

under frame mudguard mounting under the frame with rubber straps width of mudguard: 90 mm weight: 95 g material: plastic packed on FORCE card

Code: 0755E

HEBIE 755E CLIP ON MUDGUARD 26"-29er

# Mudguard 755 | VIPER S Thanks to its futuristic appearance, the "Viper S" is a real eye-catcher among the mudguards and is also as efficient as a fixed mudguard. The modern look mudguard fits any wheel size from 26"-29". The “Viper S” is the almost universally mountable mudguard set (front and rear) under all mudguards. Close to the tire, following the radius of the wheel, the cyclist is reliably and inconspicuously protected from wetness and dirt. ##### Stay clean.

Code: 757E

HEBIE 757E CLIP ON MUDGUARD 20"

Clip-on mudguard set (front and rear) for child's bicycle, child's MTB/ATB, folding bike, or cutting-edge 20" urban bikes * suitable for 20" wheels * width approx. 50 mm * color: black * incl. fixing material * length front approx 54 cm, rear approx. 72 cm * weight 170 g (without fixings)

Code: 758E

HEBIE 758E CLIP ON MUDGUARD 24"

Clip-on mudguard set (front and rear) for child's bicycle, child's MTB/ATB or cutting-edge 24" urban bikes * suitable for 24" wheels * width approx. 55 mm * color: black * incl. fixing material * length front approx 64 cm, rear approx. 84 cm * weight 220 g (without fixings)

Code: 760E

HEBIE 760E TREKKING CLIP ON HYBRID MUDGUARD 700C

Developed almost 30 years ago, it is the original! It is now available more or less as a retroversion now. The basic shape has been kept, the decor has been adpated to the VIPER. What remains is the name: TAIPAN 26. In its heyday, it was the hottest trend for the emerging MTB culture of the 80s. The practical installation an almost unviversal fit impressed from the word go. The TAIPAN 26 virtually sold itself, in the last millenium, millions were sold throughout Europe. * width approx. 55 mm * easy to fit in a matter of seconds * length front approx. 56 cm, rear approx. 75 cmweight 275 g (incl. fixings), 150 g (without)

Code: 761E

HEBIE 761E TREKKING CLIP ON HYBRID MUDGUARD 700C

761 - is the original clip-on mudguard amongst clip-on mudguard sets for the non-equipped 28" bike in everyday use with the same perfect protection like a "firm" mudguard. The classic urban/trekking version of the VIPER MTB 751 for the non-equipped 28" bicycle in everyday use. Close to the tyre following the radius of the wheel the VIPER T also provides reliable and inconspicuous protection from the wet and dirt. The VIPER T was designed for 28" wheels. In connection withuniVIP stays 799it becomes a sporty "firm" mudguard. * suitable for 28" wheelsize * clean forms and design * strongly enhanced splash protection due to technical revision with extension of mudguards front and rear * highly warp-resistant design * mount using approved standard bracket of stainless steel * incl. stainless steel fixings (bracket ETC .) and seattube clamp * easy to fit in a matter of seconds * suitable for quick OEM * length front approx. 60 cm, rear approx. 78 cm * width approx. 42-45 mm * weight: 350 g (incl. fixings), 280 g (without) * color: black

Code: 770E

HEBIE 770E MTB CLIP ON "V" BRAKE TYPE MUDGUARD 26"

The ultra-flat mudguard for extra-widetyresand oversized wheels. The 774 is the mudguard fortyresmore than 60 mm wide and a wheel radius of 24". It is extremely light and comes with a very distinctive look. In short: It doesn't fit VIPER, but it fits where VIPER doesn't. * thin profile and very low height! (approx. max. 14 mm)easy to fit in a matter of seconds * width approx. 60 mm * for tyresmorthant60 mm wide (>2,36") * 774 fits 24":length front approx. 48 cm, rear approx. 55cmweight250 g (incl. fixings), 130 g (w/o)

Code: 0726E

HEBIE VIPER X 26"-29" REAR GUARD

If all other options failed, as a last resort the VIPER X acts as a saddle mudguard (rear) or as a fork clamping guard (front, VIPER X F - 726 F). VIPER X 726 is the most durable mudguard of its type. The buckle fastening was actually first developed for ski boots and fixes the VIPER X onto the saddle tube. The fine adjustment of the arm over the double joint is remarkably stable. * exclusive splash guard for rear wheel * suitable for frames with and without suspension * special cross design * for 26" up to 29" wheels * easy to fit in a matter of seconds * robust quick-release device for all seatpost diameters (up to 42 mm tubes) * height and pitch angle coninously adjustable thanks to stable double link * length approx. 44 cm, width approx. 72 mm * weight: 240 g * colo

Code: 0716E

HEBIE VIPER X STEALTH 26"-29" REAR GUARD

The new, wide mudguard from the VIPER-Series in STEALTH design offers extra wide protection and its angular, sporty design is impressive. The clip-on guard plate is also available in a set (0716 E SET). * Length: approx. 52 cm * Width: approx. 11 cm * For 26" up to 29" wheels * Seat tube diameter: 25-35 mm

Code: WET

KELLYS WET MUDGUARD 27.5-29ER

WET mudguard increases the comfort of ride on wet or muddy terrain but can be easily and quickly removed during nice and dry weather. * Simple mounting * Increased stability * Compatible also with disc brakes * Protects you from mud DETAILS Fits 27,5-29” wheels Metal stay for stability of rear mudguard INCLUDES Dics brakes adapter Mounting material and tools COMPATIBILITY Suitable for 29” wheels

Code: C4P306

LASALLE NORTH DAK0TA CLIP ON MUDGUARD 24"/29" BLACK

Mudguards

BELELLI 26/28 CLIP ON MUDGUARD

ECT ROAD QR ROAD MUDGUARD PAIR BLACK

ETC TREKKING MUDGUARD PAIR SILVER 700 x 48